This blog post may be a little too technical if you are not into electrical engineering so please feel free to skip this and the later one about the boat electrical system. This post is mainly about the move from the original system that came with the boat to a slightly upgraded one to match… Continue reading Engine – Part 3 Engine electrical system – Starting, Battery charging, Choke, Ignition cut-off and fuel cut-off solenoid valve.
Month: February 2018
Engine – Part 2 Engine cooling system assembly, Zinc pencil, Engine mounts & adding the controls.
Tuesday 19/9/2017 – Temporarily put the exhaust “Resonator” back on the engine so I can measure control cable movements. Assembled the new control lever box with the cables in the right places for the movements required. With the gear mounting adapter in it’s current position it needs around 3cm to move from neutral to… Continue reading Engine – Part 2 Engine cooling system assembly, Zinc pencil, Engine mounts & adding the controls.